Manual Handling in UK Breweries, Distilleries and Cider Houses

A brewery, distillery or cider house combines process work with stores, a yard, and often a public taproom. The loads are kegs, casks, sacks of malt or fruit, crates of bottles, and awkward parts for hoses and pumps. Floors can be wet, temperatures change between a cold room and a packaging hall, and a delivery may arrive while a tour is still walking through.

This is general guidance, not legal advice. MHOR 1992, the 1974 Act, and official HSE guidance set the frame. It does not invent process temperatures or a course syllabus. Check the live outline on British Manual Handling.

Kegs, cellars and the slope

A full keg is a dense load on a rim that may be wet, often moved on a ramp or a cellar stair. Avoidance comes first: a better stillage position, a lift if one exists, a delivery broken into smaller moves, or a second person for a stair that cannot be redesigned today. TILE helps you describe the job honestly rather than hoping a roll will always be gentle.

Wheels and stillages are not automatic answers. A keg rolled too fast on a wet slope, or dropped onto a stillage at the wrong angle, can injure a foot or a back. A practical method says when two people are needed, where a keg may stand without blocking an escape route, and how the dock is cleared without a rush before the taproom opens.

Bags, fruit and packaging

Sacks of malt, hops, sugar or fruit, and crates of bottles, are often stored high and pulled down in a hurry when a brew or a press starts. Store heavy bags where they can be pulled onto a table or a sack trolley, not lifted from a high rack at the start of a shift. Break a pallet into smaller lots near the point of use, and set a maximum stack height.

On a packaging day the risk sits at the end of the line: twisting to stack crates, leaning into a van, or keeping up by lifting more at once. A pallet truck, a scissor table, or a short pause of the line can be more useful than a reminder to bend the knees. People who only help at harvest or on a festival bottling day need the same brief as the regular team.

Hose, plant parts and the maintenance lift

Not every load in a brewery is a keg or a sack. Hoses, fittings, small motors, and cleaning equipment are moved when something fails, often in a hurry and often in a wet walkway. The person may be reaching over a run of pipe or stepping around an open drain. Those lifts belong in the assessment even if they only happen a few times a month.

A simple hook, a designated tray, or a rule that a heavy part is not carried up a wet stair alone can reduce the job before anyone talks about technique. Keep spare parts where they can be slid or wheeled, not stored on a high shelf “because they are used rarely.” Rare jobs still injure people.

Lone work in cellars and cold rooms

A person moving kegs or crates alone in a cellar or a cold room has fewer options if a load shifts. The method should say when lone handling is not allowed, how that person calls for help, and how the door is kept from trapping them. A radio or a check-in is part of the handling plan, not only a lone-work policy written for another reason.

If a tour or a taproom service makes it harder to get a second person, change the timing of the move rather than accepting a lone keg roll as normal. Recheck official HSE guidance and the current outline on British Manual Handling when you write that rule. Do not invent a legal figure this page does not have.

Yards, tours and enough in practice

A yard may be a visitor car park as well as a dock. Say when a truck may stand, when visitors are kept clear, and who owns the space during a delivery. A tour group and a keg trolley should not share a corner. Visitors should not be asked to “give us a hand” with a case.

Enough in practice means the jobs have been watched in the wet and in a rush, the worst carries redesigned, and the remaining lifts given a method a new starter can follow. When the site adds a tank or a seasonal cider, review the handling then. Training can support the work once you have confirmed what British Manual Handling offers. Recheck official HSE guidance and the live pages; do not invent figures the site does not state.

British Manual Handling