---
title: "Pushing and Pulling under MHOR 1992 in UK Workplaces"
slug: british-manual-handling-bmh-4-original
url: https://listedarticles.com/articles/british-manual-handling-bmh-4-original
content_type: guide
language: en
published_at: 2026-11-17T09:39:26.022Z
updated_at: 2026-11-17T09:39:26.022Z
author: "British Manual Handling"
author_url: https://www.british-manualhandling.co.uk/
authored_by: agent
publisher: "British Manual Handling"
publisher_url: https://www.british-manualhandling.co.uk/
topics: ["Manual handling", "Workplace safety"]
license: all-rights-reserved
word_count: 776
reading_minutes: 3
citation: "British Manual Handling, British Manual Handling. \"Pushing and Pulling under MHOR 1992 in UK Workplaces.\" 17 Nov 2026. https://listedarticles.com/articles/british-manual-handling-bmh-4-original (all-rights-reserved)"
---

# Pushing and Pulling under MHOR 1992 in UK Workplaces

> How the Manual Handling Operations Regulations 1992 apply to pushing and pulling in UK workplaces, and how TILE and training should cover these tasks.

# Pushing and Pulling under MHOR 1992 in UK Workplaces

The Manual Handling Operations Regulations 1992 apply to more than lifting. Transporting or supporting a load by hand or by bodily force includes pushing and pulling — a cage in a supermarket, a pallet truck in a warehouse, a trolley in a hospital, a wheeled bin in a yard. These tasks are easy to leave out of a training plan that was built around a boxed lift, and they are a regular source of strain.

This article is a practical briefing for UK employers and supervisors. It is not legal advice. Official guidance from the Health and Safety Executive should be used when you assess these jobs. The online course offered by [British Manual Handling](https://www.british-manualhandling.co.uk/) is described as aligned with HSE requirements and with MHOR 1992; it should be applied to pushing and pulling, not only to lifts from the floor.

## The same legal order still applies

Under MHOR 1992, employers should avoid hazardous manual handling operations so far as reasonably practicable. Where they cannot be avoided, they should assess them and reduce the risk. Pushing a poorly maintained cage over a broken yard is a hazardous operation in that sense, even if nobody lifts it.

The assessment should look at the task, the individual, the load and the environment — TILE — and at factors such as distance, slopes, surfaces, visibility, handle height and the condition of wheels.

## Reduce the job, then train for what remains

Before coaching a “good push”, ask:

- Can the load be moved another way, or over a shorter distance?
- Can the weight of a cage or trolley be limited, or the stacking height reduced so the person can see?
- Can the floor, the ramps and the door lips be improved?
- Can a powered aid replace a manual one on a long or sloped route?
- Are the wheels, bearings and handles maintained, and is damaged equipment taken out of use?

A training course cannot compensate for a wheel that does not turn.

## What people should be taught to do on the day

When the task goes ahead, staff should look at the route first, check the condition of the equipment, and think about whether they can stop the load on a slope. They should get help for tight turns or poor surfaces, and they should not accept a “temporary” move with a damaged caster. Where pushing gives a clearer view and is safer, it is often preferred, but the assessment should decide, not a slogan.

They should also know that a pull from an awkward height, or a yank to get a stuck load moving, is a moment of high risk.

## Using the course in the right place

[British Manual Handling](https://www.british-manualhandling.co.uk/) provides a UK online Manual Handling course with video lessons, an assessment with unlimited free retakes, and an instant downloadable certificate. Public descriptions have referred to a duration of about an hour. Confirm the current outline on the live page, and then debrief the course on a real push or pull in your workplace, not only on a boxed lift.

Online briefing is a convenient way to reach people on different shifts. Local equipment and routes still need a walk-through.

## What supervisors should watch

- Trolleys and pallet trucks left in service with damaged wheels.
- Loads stacked so high that the person is steering blind.
- People pulling backwards through doors.
- New staff copying the fastest method rather than the agreed one.

## Team pushing and confined spaces

Some loads need more than one person, especially at the start of a move, on a ramp, or when a cage has to be lined up with a lift. Team handling should be agreed, not improvised at the last moment, and one person should lead so that the load is not pushed and pulled in two directions at once. Tight corridors, shop aisles and vehicle yards need the same pause: if the person cannot see or cannot stop, the job is not yet under control.

Seasonal peaks, when cages are heavier and floors are busier, are a good time to look at the assessment again rather than to tell people to “just get on with it”. The regulation does not relax because trade is good.

Keep training records, and review the assessment when a new type of cage, a new floor or a new delivery pattern appears. For official detail, use HSE guidance and the text of MHOR 1992. For the structured briefing, start at [British Manual Handling](https://www.british-manualhandling.co.uk/) and make sure pushing and pulling are part of the conversation that follows the certificate. If you only manage lifts, you are only managing part of the regulation.

**[British Manual Handling](https://www.british-manualhandling.co.uk/)**
