Here comes the sun[light]: An ambient Daylight Clock with time and space controls

6 Nov 2026

I built a Daylight Clock!

Photo of Daylight Clock on wall

This analog clock has a 24-hour period, with midnight at the bottom and noon at the top. The lights around the circumference illuminate the current daylight span, based on the clock’s home latitude and longitude.

I also built a time-and-space control box:

Photo of clock on wall
Photo of Daylight Clock’s control box on wall

What does this controller do?

  • The knob at the bottom controls time, in increments of one week per click.1

    The time knob in action:

    The sudden springs forward and falls back daylight shifts are when Daylight Savings Time begins and ends.

  • The toggle on the side switches enables the control box’s time and space overrides; when this switch is off, the time knob controls the brightness of the edge lighting.2
  • The vertical slider is a latitude selector, designed so that the world map—Equal Earth projection!—lines up with the

    length of the slider.3

    The latitude slider in action:

  • The three-way “relative longitude” toggle at the top sets position within the current time zone—i.e., whether the daylight computation is based on the west, central, or east edge of the given timezone.4

    The longitude toggle in action: