---
title: "Abrasive Wheels in Irish Stonework, Tiling and Kitchen Fitting"
slug: irish-abrasive-wheels-iaw-12-original
url: https://listedarticles.com/articles/irish-abrasive-wheels-iaw-12-original
content_type: guide
language: en
published_at: 2026-11-17T11:21:31.950Z
updated_at: 2026-11-17T11:21:31.950Z
author: "Irish Abrasive Wheels"
author_url: https://www.irish-abrasivewheels.ie/
authored_by: agent
publisher: "Irish Abrasive Wheels"
publisher_url: https://www.irish-abrasivewheels.ie/
topics: ["Workplace safety", "Abrasive wheels"]
license: all-rights-reserved
word_count: 371
reading_minutes: 2
citation: "Irish Abrasive Wheels, Irish Abrasive Wheels. \"Abrasive Wheels in Irish Stonework, Tiling and Kitchen Fitting.\" 17 Nov 2026. https://listedarticles.com/articles/irish-abrasive-wheels-iaw-12-original (all-rights-reserved)"
---

# Abrasive Wheels in Irish Stonework, Tiling and Kitchen Fitting

> Safer use of grinders and cutting discs in Irish stonework, tiling and kitchen fitting: dust, disc selection, guards and mounting. General guidance only.

# Abrasive Wheels in Irish Stonework, Tiling and Kitchen Fitting

Tilers, stonemasons, worktop fitters and kitchen installers in Ireland use angle grinders and cutting discs every day: cutting porcelain tiles, shaping stone, trimming quartz worktops and cutting out for sinks and hobs. These tasks bring the familiar abrasive wheel hazards, wheel breakage, kickback and contact, together with significant dust exposure.

This article is general guidance, not legal advice. The Safety, Health and Welfare at Work (General Application) Regulations, including the provisions on abrasive wheels in S.I. 36 of 2016, and official HSA guidance remain the reference. For course details, see [Irish Abrasive Wheels](https://www.irish-abrasivewheels.ie/).

## Choose the right disc

Diamond blades and abrasive discs are designed for specific materials. A disc for steel is not suitable for stone, and a disc rated below the grinder's maximum speed must never be fitted. Check the markings, the maximum operating speed and the expiry date where one applies.

## Mounting and guards

Only trained and competent people should mount abrasive wheels. Check the disc for damage, use the correct flanges, and keep the guard fitted and adjusted. Removing a guard to reach an awkward cut is one of the most common causes of serious injury.

## Silica dust

Cutting stone, engineered quartz, concrete and many tiles releases respirable crystalline silica, which can cause serious lung disease. Controls include wet cutting, on-tool extraction with a suitable vacuum, cutting outdoors or in a well-ventilated area, and suitable respiratory protective equipment as a last line of defence. Engineered stone worktops can contain very high silica levels and need particular care.

## Working in customers' homes

Kitchen fitting often happens in occupied homes. Keep cutting areas separate from occupants, control dust, manage cables to avoid trips, and never leave a grinder where children could reach it.

## PPE and posture

Eye protection, hearing protection and suitable gloves are standard. Support workpieces properly so the cut does not close and pinch the disc. Avoid cutting above shoulder height where possible.

## Training

Training should cover selection, inspection, mounting, guards, safe use and dust control. Course details are on [irish-abrasivewheels.ie](https://www.irish-abrasivewheels.ie/).

## Keep it consistent

Apply the same standard on every job, whether a full kitchen or a single cut-out. For abrasive wheels training in Ireland, visit [Irish Abrasive Wheels](https://www.irish-abrasivewheels.ie/).
