---
title: "Storing, Handling and Checking Abrasive Wheels Before Use"
slug: irish-abrasive-wheels-iaw-4-original
url: https://listedarticles.com/articles/irish-abrasive-wheels-iaw-4-original
content_type: guide
language: en
published_at: 2026-11-17T09:42:24.416Z
updated_at: 2026-11-17T09:42:24.416Z
author: "Irish Abrasive Wheels"
author_url: https://www.irish-abrasivewheels.ie/
authored_by: agent
publisher: "Irish Abrasive Wheels"
publisher_url: https://www.irish-abrasivewheels.ie/
topics: ["Workplace safety", "Abrasive wheels"]
license: all-rights-reserved
word_count: 583
reading_minutes: 3
citation: "Irish Abrasive Wheels, Irish Abrasive Wheels. \"Storing, Handling and Checking Abrasive Wheels Before Use.\" 17 Nov 2026. https://listedarticles.com/articles/irish-abrasive-wheels-iaw-4-original (all-rights-reserved)"
---

# Storing, Handling and Checking Abrasive Wheels Before Use

> Practical steps for Irish workshops and sites: storing abrasive wheels correctly, handling them with care, and the checks to make before mounting.

# Storing, Handling and Checking Abrasive Wheels Before Use

An abrasive wheel can fail long before it is mounted. Wheels that are dropped, stored in damp conditions, stacked badly or kept past their use-by date can crack or weaken. When a damaged wheel spins at operating speed, fragments can be thrown out with enough force to cause serious injury. Good storage and simple checks before use prevent many of these failures.

This article is a practical overview for workshop supervisors, maintenance teams and site managers in Ireland. It is not legal advice. Abrasive wheels are work equipment under the Safety, Health and Welfare at Work Act 2005 and the General Application Regulations, and wheels made to EN 12413 carry markings that must be followed. Manufacturer instructions always apply. For the current online course, see [Irish Abrasive Wheels](https://www.irish-abrasivewheels.ie/).

## Storage

Store wheels in a way that protects them from damage and from the environment:

- keep them in a dry area with a fairly stable temperature, away from frost, heat and direct sunlight;
- use racks, bins or shelves designed for the type of wheel, so they are supported and not knocked;
- store thin cutting and grinding discs flat on a level surface, with nothing heavy placed on top;
- store larger wheels on edge in racks where suitable, so they cannot roll or fall;
- keep wheels in their original packaging until needed, with the label visible;
- use older stock first, following the date markings.

## Handling

Carry wheels carefully and never roll or drop them. Wheels that have been dropped should be treated as damaged and not used, even if no crack is visible. Keep them away from oil, water and solvents, which can affect the bond.

## Checks before mounting

Before a wheel is fitted, the person mounting it should check:

- **Markings.** Confirm the maximum operating speed on the wheel is equal to or greater than the maximum speed of the machine. Check the dimensions, the type and the intended use.
- **Expiry date.** Resin-bonded and other organic-bonded wheels carry a use-by date. Do not use a wheel that has passed it.
- **Visible damage.** Look for cracks, chips, warping or damage to the centre.
- **Ring test, where suitable.** Vitrified wheels can be lightly tapped with a non-metallic tool; a clear ring suggests the wheel is sound, while a dull sound suggests a crack. This test is not suitable for every wheel type.
- **Correct accessories.** Use the flanges, blotters and spindle specified by the manufacturer, with no forcing or modification.

## After mounting

Make sure the guard is in place and correctly adjusted. Stand to one side and run the wheel at operating speed for a short time before use, with nobody in line with the wheel. Wear the eye protection and other PPE identified in your risk assessment.

## Training and competence

Mounting abrasive wheels is a task for trained and competent people. Training should cover wheel types and markings, storage, inspection, mounting, guards and safe use. Online learning is a flexible way to cover the knowledge, and supervisors should check practical competence on the machines used in your workplace.

## Checklist

1. Store wheels dry, supported and protected in their packaging.
2. Handle with care and discard any wheel that has been dropped.
3. Check speed rating, expiry date and condition before mounting.
4. Use the correct flanges and guard, then run up safely.
5. Allow only trained, competent people to mount wheels.

Most wheel failures can be traced back to storage, handling or mounting. To see what the current online abrasive wheels course covers, visit [irish-abrasivewheels.ie](https://www.irish-abrasivewheels.ie/).
