---
title: "Bench and Pedestal Grinders: Rests, Guards and Daily Checks in Ireland"
slug: irish-abrasive-wheels-iaw-7-original
url: https://listedarticles.com/articles/irish-abrasive-wheels-iaw-7-original
content_type: guide
language: en
published_at: 2026-11-17T10:24:56.140Z
updated_at: 2026-11-17T10:24:56.140Z
author: "Irish Abrasive Wheels"
author_url: https://www.irish-abrasivewheels.ie/
authored_by: agent
publisher: "Irish Abrasive Wheels"
publisher_url: https://www.irish-abrasivewheels.ie/
topics: ["Workplace safety", "Abrasive wheels"]
license: all-rights-reserved
word_count: 327
reading_minutes: 1
citation: "Irish Abrasive Wheels, Irish Abrasive Wheels. \"Bench and Pedestal Grinders: Rests, Guards and Daily Checks in Ireland.\" 17 Nov 2026. https://listedarticles.com/articles/irish-abrasive-wheels-iaw-7-original (all-rights-reserved)"
---

# Bench and Pedestal Grinders: Rests, Guards and Daily Checks in Ireland

> Bench and pedestal grinders are common in Irish workshops. Practical checks on tool rests, guards, wheel condition, speed and PPE before use.

# Bench and Pedestal Grinders: Rests, Guards and Daily Checks in Ireland

Bench and pedestal grinders are found in many Irish workshops, garages, farms and maintenance departments. Because they are familiar, they are often used without much thought. Yet a poorly adjusted rest or a damaged wheel can lead to serious injuries.

This article is general guidance, not legal advice. Irish legislation on work equipment and abrasive wheels, HSA guidance and the manufacturer's instructions remain the reference. For abrasive wheels training, see [Irish Abrasive Wheels](https://www.irish-abrasivewheels.ie/).

## The tool rest

The work rest should be close to the wheel — usually only a small gap, as specified by the manufacturer — so that the workpiece cannot be drawn in between the rest and the wheel. Adjust it as the wheel wears, with the machine stopped.

## Guards and tongue guards

The wheel guard should be in place and properly adjusted. The adjustable tongue at the top of the guard should be kept close to the wheel. Never use a grinder with the guard removed.

## The wheel itself

Before use, look at the wheel for cracks, chips or damage. Check that it is the correct type for the machine and that its maximum speed is at least the speed of the spindle. Wheels should only be mounted by a trained, competent person.

## Stand to one side at start-up

When starting the grinder, stand to one side and let the wheel run for a short time before using it. If there is unusual vibration or noise, stop and investigate.

## PPE and work practices

Wear eye protection suited to the task, even if the machine has a screen. Do not grind on the side of a wheel not designed for it, do not force work against the wheel, and keep loose clothing and hair away.

## Daily checks and records

A short daily check covering the rest, guards, wheel condition and the screen helps catch problems early. [Irish Abrasive Wheels](https://www.irish-abrasivewheels.ie/) provides abrasive wheels training for Irish workplaces.
