Fire Wardens During Building Works and Refurbishment in Ireland
Building work in an occupied premises changes the fire picture. Escape routes may be blocked or diverted, fire doors may be propped open for contractors, alarms may be isolated to stop dust setting them off, and hot work brings new ignition sources. Fire wardens are often the people who notice these changes first.
This article is general guidance, not legal advice. The Safety, Health and Welfare at Work Act 2005, fire safety legislation and guidance from the HSA and local fire authorities remain the reference. For fire warden training, see Irish Fire Warden.
Before works start
Ask to see how the works will affect escape routes, fire doors and the alarm system. If a route is closed, there must be an alternative, signed and communicated to staff. Any changes to the evacuation plan should be agreed before the contractor arrives.
Daily checks
During the works, fire wardens can check at the start of each day that:
- escape routes and final exits are clear and unlocked;
- fire doors are closed unless held open by an approved device;
- extinguishers have not been moved or covered;
- waste and packaging are being removed and not left in corridors;
- areas where alarm heads are covered are known and the covers are removed at the end of the day.
Hot work
Cutting, welding and grinding should be controlled by a hot work permit system managed by the person in charge of the works. Fire wardens should know where hot work is taking place and that a fire watch is kept for a period after it finishes.
Contractors and the evacuation
Contractors must know the alarm sound, their escape route and the assembly point, and they must be counted in a roll call. Ask for a list of contractors on site each day.
Report what you see
Fire wardens are not responsible for managing the works, but they should report problems straight away. Irish Fire Warden offers fire warden training for Irish workplaces.