Cooking, Cooling, Reheating and Hot Holding: Temperature Control in Irish Kitchens

Temperature is the control most Irish kitchens rely on every day. Cooking kills many harmful bacteria, cold storage slows their growth, and fast cooling stops them multiplying in the danger zone between chilled and hot. A HACCP plan turns these facts into specific steps that staff can follow and check.

This article is a plain overview for food business operators, chefs and supervisors in Ireland. It is not a substitute for official guidance. Irish food businesses work under EU Regulation (EC) No 852/2004 on food hygiene and the national rules that support it, and the Food Safety Authority of Ireland (FSAI) publishes detailed guidance, including the Safe Catering pack. Always check current FSAI guidance for the exact limits that apply to your business. For the online course itself, see Irish HACCP.

Why temperature is usually a critical control point

In HACCP terms, a critical control point (CCP) is a step where control is essential to prevent or remove a food safety hazard. For many caterers, cooking and cooling are CCPs, and chilled storage and hot holding are close behind. Each one needs a critical limit, a way to monitor it, a corrective action if it goes wrong, and a record.

The main temperature steps

Chilled storage. Fridges and cold rooms should keep high-risk food at 5°C or below. Check and record the temperature at least daily, and more often in busy periods.

Cooking. FSAI guidance commonly refers to a core temperature of 75°C for cooked food. Use a clean, calibrated probe in the thickest part, and probe more than one item in a large batch.

Cooling. Cooked food that will not be served straight away must be cooled quickly. Divide large quantities into shallow containers, use a blast chiller if you have one, and do not leave food to cool slowly on the counter. Set a time limit in your plan that follows FSAI guidance and record when cooling starts and when the food reaches chilled temperature.

Reheating. Food should be reheated thoroughly, commonly to a core temperature of at least 70°C, and only once.

Hot holding. Food kept hot for service should stay at 63°C or above. Check it during service and discard food that has fallen below the limit for longer than your plan allows.

Monitoring that staff will actually do

Records only help if they reflect what happened. Keep monitoring simple:

  • one sheet or app screen per day, with clear columns;
  • a probe thermometer that is cleaned between uses and checked against a known reference;
  • a named person responsible on each shift;
  • a short note of what was done when a reading was out of limit.

Corrective actions

Decide in advance what happens when a limit is missed. Typical actions include continuing to cook until the core temperature is reached, moving food to a working fridge, adjusting a faulty unit, or throwing food away when safety cannot be assured. Write the action down; inspectors look for evidence that problems are noticed and dealt with.

Training

Every food handler should understand why each temperature matters, how to probe correctly, and what to do when something is out of range. Supervisors need enough knowledge to review records and spot patterns. Online HACCP training lets staff cover the principles at their own pace, and the kitchen can then practise the specific checks on the job.

Quick checklist

  1. Identify which temperature steps are CCPs in your plan.
  2. Set limits that follow current FSAI guidance.
  3. Monitor with a calibrated probe and simple records.
  4. Agree corrective actions in advance.
  5. Train staff and review records weekly.

Good temperature control is routine work done consistently. To see what the current online HACCP course covers, visit irish-haccp.ie.