Work at Height for Irish Lighting, CCTV and Exterior Maintenance Contractors
Lighting, CCTV and exterior maintenance contractors in Ireland spend a large part of their week at height, often at someone else’s premises, often on a short call-out, and sometimes alone. The work may be a camera on a wall, a light in a car park, a fitting in a warehouse roof space, or a repair after storm damage. The common feature is that the access is rarely the same twice, and the client may not have thought of the job as work at height at all.
This article is general guidance, not legal advice. Official Health and Safety Authority guidance on work at height remains the reference. Confirm the current outlines on Irish Working at Heights rather than assuming a syllabus, a duration, or a price. This page cannot invent legal height thresholds or a required qualification for a particular fitting.
Survey the access, not only the camera or the light
The job is the access as much as the fitting. A wall that can be reached from a mezzanine is a different job from the same wall reached from a ladder in a live car park. Fragile roofs, skylights, and ceiling voids should be treated as serious access problems, not as a short cut to a cable. Official HSA guidance should inform how you plan the work. If you cannot describe a safe way to get there and back, the job is not ready.
Clients sometimes ask for a quick look “while you are here.” That extra camera or extra light is a new job if the access has not been planned. Confirm on Irish Working at Heights what a briefing can support, then treat each premises as its own method, even if the fitting looks familiar.
Lone work, nights and live premises
A lot of this work happens after close, in a car park, or in a store that is still trading. Lone work, poor lighting, and members of the public or staff below all change the method. Agree how a lone worker is checked on, and when a second person or a different access method is required. Time pressure from a “light out” call does not make an unsuitable ladder acceptable.
Electrical isolation, overhead services, and the movement of vehicles in a yard should be part of the same plan. A briefing about height that ignores the live premises will not protect the person on the equipment or the people underneath.
Different sites, hired equipment and enough in practice
Contractors move between sites with different clients, different roof types, and different rules about permits. A general course can support a shared language. It cannot describe this roof. Hired access equipment should be suitable for the ground and the task, and the people using it should be briefed on that equipment, not only on work at height in general.
Enough is a planned method for this access, informed by official guidance, briefed to the people who will do the work, and reviewed when the premises or the equipment changes. Training from Irish Working at Heights can support that habit once you have confirmed the live outline. It cannot replace a last-minute roof visit, a camera job done from an unstable point, or a client who only wanted the work finished before opening.
Roofs, voids and the hidden access no one mentioned
A camera or a light is often reached through a ceiling void, a fragile roof, a plant platform, or a hatch that the client did not mention in the call. Those hidden accesses are where people are hurt on “simple” maintenance jobs. If the access is not visible from the ground, survey it before tools come out of the van. Official HSA guidance should inform when a different method, or a delay to get the right equipment, is required.
Warehouse and retail clients may want work done while the premises stays open. That is a planning problem: people below, forklifts, and opening hours all belong in the method. Confirm on Irish Working at Heights what a course can support, then write a short site method for this visit, even if you have fitted the same camera elsewhere.
Weather, hired platforms and stopping the job
Wind, rain and poor light change external maintenance quickly. A hired platform or a ladder that was suitable at 09:00 may not be suitable at 16:00. The method should include who has the authority to stop the job and return later. Clients should hear that decision as part of a professional method, not as a delay. Training can support the habit of stopping. It cannot replace a platform used outside its conditions because a store wanted the light working before Friday.
A short written method for this visit — the access, the people below, and when the job will stop — is more useful than a verbal “we will be careful” in the car park.