Work at Height in Irish Museums, Libraries and Heritage Sites
Work at height in a museum or library rarely involves scaffolding on a busy site, but it happens every week: reaching the top shelf, hanging a painting, adjusting gallery lighting, changing a banner in an atrium, clearing a gutter on a historic roof. Falls from low heights cause serious injuries, and old buildings make many of these jobs harder.
This article is general guidance, not legal advice. The General Application Regulations (Part 4, work at height) and Health and Safety Authority guidance remain the reference. For training, confirm the current outline on Irish Working at Heights. The live site decides course content, duration and price.
Plan the job
The Regulations require work at height to be properly planned, supervised and carried out by competent people. Ask first whether the job can be done from the ground: a telescopic tool for a light fitting, a lowering system for a banner, a different storage location for heavy volumes. If not, choose the right equipment for the task rather than the nearest stepladder.
Library shelving and kick stools
Tall shelving invites stretching. Provide kick stools and library steps with handrails where shelves are high, and discourage climbing on lower shelves or chairs. Store the heaviest items on middle shelves so nobody lifts a heavy book above shoulder height while on a step.
Exhibition hanging and lighting
Gallery hanging and lighting adjustments are often done by small technical teams. Use podium steps, mobile towers or MEWPs as appropriate, keep the area below cordoned off from visitors, and make sure equipment is inspected and suitable for the floor, especially on delicate historic surfaces.
Roofs, gutters and contractors
Roof and gutter work on heritage buildings should normally be done by competent contractors with appropriate access and edge protection. Agree method statements in advance and keep visitors away from the work area.
Training and inspection
Staff who use ladders, steps or towers need training appropriate to the equipment. Inspect equipment regularly and remove damaged items from use.
For training that fits your tasks, check the current course on Irish Working at Heights.