Mobile Elevating Work Platforms: Planning and Supervision on Irish Sites

Mobile elevating work platforms (MEWPs), such as scissor lifts and boom lifts, often provide a safer way to work at height than ladders. They also bring their own risks: overturning, entrapment against overhead structures, falls from the basket and contact with power lines.

This article is general guidance, not legal advice. The Safety, Health and Welfare at Work (General Application) Regulations, the HSA and manufacturers' instructions remain the reference. For working at height training, see Irish Working at Heights.

Pick the right machine

Choose a MEWP that suits the job: the working height, outreach, platform capacity, indoor or outdoor use, and the ground it will stand on. A machine that is too small tempts people to overreach or climb on guard rails.

Check the ground and the area

Soft ground, slopes, kerbs, manholes and cellars can all cause a machine to tip. Check the ground before setting up, use spreader plates where outriggers are used, and keep the area underneath cordoned off from pedestrians and traffic.

Overhead hazards

Beams, ceilings, branches and power lines can trap or electrocute operators. Plan the route of the platform and keep a safe distance from overhead lines. Consider equipment that reduces the risk of entrapment.

Trained operators and harnesses

Only trained, authorised people should operate a MEWP. Where the manufacturer or the risk assessment requires it, operators in boom-type platforms wear a harness with a short restraint lanyard attached to the anchor point in the basket.

Have a rescue plan

If the machine fails or the operator is taken ill, someone on the ground must know how to use the ground controls to bring the platform down. Make sure that person is present and knows what to do.

Daily checks

Operators should carry out pre-use checks and report defects. Irish Working at Heights offers working at heights training for Irish employers and workers.