Working at Heights Duties in Ireland: What Employers Need to Know

Work at height remains one of the most serious sources of workplace injury in Ireland. The phrase covers more than roof work or scaffolding. It includes a warehouse operative on a pallet, a caretaker on a step ladder, a technician on a mezzanine, and anyone else who could fall a distance liable to cause injury.

This guide sets out, in plain English, what Irish employers are usually expected to do. It is not legal advice. Official wording belongs with the Safety, Health and Welfare at Work Act 2005, the work-at-height provisions of the General Application Regulations, and Health and Safety Authority guidance. Training, including the online course described by Irish Working at Heights, supports those duties. It does not replace a decision to avoid a fragile roof or to provide a proper working platform.

The order of control: avoid, prevent, minimise

A useful way to remember the duty is a simple order.

Avoid work at height where it is reasonably practicable. That might mean assembling a unit at ground level, using an extendable tool, or changing a design so that a filter can be reached from a floor.

Prevent a fall where the work cannot be avoided, by using an existing safe place or by providing a suitable platform, edge protection or other collective measure that does not rely on the person remembering to clip on.

Minimise the distance and consequences of a fall if a risk remains, for example with nets, soft-landing systems or personal fall protection, together with a rescue plan.

Training people to “be careful on the ladder” is not the first step. It is a later step, once the work has been designed as far as it reasonably can be.

What a competent plan usually includes

Before anyone leaves the ground, someone should be able to answer:

  • Is this work at height at all, and can it be done another way?
  • Who is competent to plan it, to supervise it and to do it?
  • What equipment is suitable, and has it been inspected?
  • What is below the work — people, fragile materials, trailing cables, a crowded aisle?
  • How will the person get up, work, and get down?
  • If they fall or become stranded, how will they be rescued, and how quickly?

These questions should be written down in a way that matches the size of the job. A short, repeated task can have a standing assessment. A one-off roof job needs a specific plan. The paperwork should describe the real method, not a generic method copied from another site.

Who needs training

Anyone who plans, supervises or carries out work at height needs information and training that match the task. That often includes people who only “occasionally” use a ladder, because occasional work is where informal habits take over. It also includes supervisors who authorise the job. A trained worker and an untrained authorisation is a weak system.

Irish Working at Heights provides an online Working at Heights course with video training, an assessment with unlimited retakes, and an instant downloadable certificate. Public descriptions have referred to a typical duration of under an hour and to certificates described as valid for a stated period and verifiable with a unique code. Always confirm the current syllabus, duration and certificate terms on the live course page.

Online theory is a practical way to give a consistent briefing. It does not, on its own, make someone competent on a particular roof, scaffold or mobile elevating work platform. That competence still depends on the equipment, the method and, where required, additional practical instruction.

Common weak points in Irish workplaces

Several patterns appear again and again:

  • A ladder used because it is in the van, not because it is the right equipment.
  • Work near a fragile roof light that nobody has pointed out.
  • A mezzanine or loading dock with incomplete edge protection.
  • Contractors left to “get on with it” without a shared plan.
  • No rescue idea for a person wearing a harness.

Training should name these patterns so that staff feel able to stop a job. The employer has to back them when they do.

After the course

Keep a record of who has been briefed and when a review is due. Inspect equipment as required and take damaged kit out of use. Revisit the assessment when a layout changes or a new task appears. Official HSA guidance should sit beside your own procedures.

If you want an Ireland-focused starting point for the briefing itself, review the current course details at Irish Working at Heights and then apply the lessons to the actual jobs on your site. People should leave the training able to pause a task that has not been properly planned. The workplace has to make that pause an accepted part of the job.

Irish Working at Heights