Ladders, Platforms and When Height Training Is Needed in Ireland

Ladders are still used every day in Irish workplaces, often for jobs that last “only a minute”. Those short jobs are where many falls occur. The question is not whether ladders are banned — they are not — but when a ladder is a reasonable choice, when a platform or other equipment should be used instead, and what training people need before they climb.

This article offers practical guidance for employers and supervisors. It is not a substitute for official Health and Safety Authority guidance or for a job-specific assessment. It also explains how an online briefing, such as the course described by Irish Working at Heights, can help staff make a better decision on the day.

A ladder is equipment, not a default

A ladder or stepladder may be suitable when the work is low risk and short duration, when a safer alternative is not reasonably practicable, and when the ladder can be used safely on a firm, level base with three points of contact and a secure hold. It is usually a poor choice when the person will need both hands for a long task, when the landing is unstable, when the work is at a significant height for a long period, or when there is a risk of contact with live electrical parts.

“Short duration” is not a loophole for spending the afternoon on a step ladder because the platform was not booked. If the job involves reaching, twisting, carrying tools or staying up long enough that fatigue becomes likely, look again at a tower, a mobile elevating work platform, or a change of method so that the work happens at ground level.

Platforms and collective protection

Where the work cannot be avoided, a working platform with suitable edge protection is often a better measure than a personal harness, because it protects everyone and does not rely on a person clipping on. Towers must be erected by people who know the manufacturer’s method. Mobile elevating work platforms need trained operators and a plan for ground conditions, overhead obstructions and rescue.

The training conversation should include these options, not only “how to climb a ladder”. Otherwise staff are being prepared for the weakest method as if it were the only one.

Inspection and condition

A well-chosen ladder in poor condition is still a poor choice. Before use, people should look for damaged stiles, worn feet, missing or loose rungs, painted timber that can hide cracks, and any previous “temporary” repair. Equipment should be marked or recorded so that formal inspections can be tracked, and damaged kit should be taken out of service.

The same habit applies to platforms, gates and guardrails. A missing mid-rail on a mezzanine is a work-at-height problem even if nobody thinks of themselves as “working at height” when they walk along it.

Who should be trained

Anyone who selects, inspects or uses a ladder or platform for work needs a briefing that matches that role. So do the people who authorise the job. New starters and contractors should not be left to copy whoever seems confident.

Irish Working at Heights offers an online Working at Heights course with video training, an assessment with unlimited retakes and an instant certificate. That kind of briefing can set out the avoid–prevent–minimise order, the limits of ladders, and the need for inspection and planning. Confirm the current course content on the live page. Then add a practical walk-through of the equipment you actually keep on site, because a generic module cannot show your own tower or the damaged stepladder that should already have been removed.

Supervising the “quick job”

Many Irish sites have a culture in which a person is asked to put up a sign, clear a gutter or reach a high shelf without anyone stopping to plan it. Supervisors can change that culture with a short, consistent question: can this be done from the ground, and if not, what equipment and how long will you be up there? If the answer is vague, the job waits.

Training supports that conversation only if the supervisor has had it too. Sending operators on a course and leaving managers out of it usually changes very little.

After the briefing

Keep records of training and of equipment inspections. Review the method when a new building, a new product or a new contractor arrives. For legal and technical detail, use current regulations and HSA guidance. For an Ireland-focused online briefing, start with the live course details at Irish Working at Heights and then look at the ladders and platforms in your own store. The right equipment, used for the right length of time, by people who feel able to stop an unsafe job, will do more to prevent a fall than a remembered set of talking points.

Irish Working at Heights