Rescue Planning for Work at Height Is Not an Afterthought
A work-at-height plan that stops at “use a harness” is unfinished. If a person falls and is left suspended, or if a platform fails or someone becomes unwell at height, you need a way of bringing them down promptly. That method has to be thought through before anyone leaves the ground.
This article is about putting rescue into the plan in Irish workplaces. It is not legal advice and it is not a rescue-training manual. Official HSA guidance and the work-at-height rules remain the reference. Training, including the online course offered by Irish Working at Heights, should make people expect a rescue plan, not invent one in a panic.
Start with the job, then ask how you would get the person down
Assess the task, the height, the surface, the ground, the weather, other work nearby and who might be affected. Apply the usual order: can the work be avoided, can a fall be prevented by collective protection, and only then what can be done to minimise injury if a fall might still occur. Alongside those questions, ask: if this goes wrong, how do we get the person down, with what equipment, and who is able to do it?
If you cannot answer, the job is not ready.
Harnesses need a method, not only a clip
Personal fall protection is sometimes necessary. It always brings a rescue problem with it. Suspension after a fall can become a medical emergency. Relying only on the fire service may be too slow, depending on the location. The plan should name the method, the equipment, the people who can use it, and how they will communicate. Those people need to be available at the time of the job, not only on a training record from last year.
Platforms need a rescue thought too
A mobile elevating work platform can fail, or a person can become unwell in the basket. How will they be brought down? The answer belongs in the plan, together with ground conditions, overhead obstructions and the competence of the operator.
Training helps people insist on a plan
A course can teach the avoid–prevent–minimise order and the idea that a job without a rescue method is not yet planned. Irish Working at Heights provides an online Working at Heights course with video training, an assessment with unlimited retakes and an instant downloadable certificate. Check the live page for the current syllabus and certificate terms, then add site-specific instruction for the equipment and rescue methods you actually use. A generic module cannot invent a method for your roof or your yard.
Communicate, then review
Tell everyone on the job, including people working below, what was decided. Keep others out of the drop zone. Stop the work if conditions change. After the job, and after any near miss, look at the rescue part of the plan again. A short note about what was awkward is more useful than a form that always says the method was fine.
Practise the rescue you have written down
A rescue method that exists only on paper may not work when it is needed. The people named in the plan should know the equipment, where it is kept, and the steps they will take. A short, calm practice, on a day when there is no emergency, is the way to find out that a bag is missing or that a radio does not work at the far end of the roof.
Practice should be proportionate. It does not need to be theatrical. It does need to be real enough that people could actually do the method under stress. If you rely on an external rescue service, confirm the likely attendance time for that location and write it into the plan, rather than assuming it will be short enough.
After any practice, or any real incident, update the page. A rescue plan that is never revisited will drift away from the equipment and the people you now have.
For official guidance, use the HSA and the current regulations. For a consistent briefing on the principles, review the course details at Irish Working at Heights and then write, in plain language, how you would get a person down from the next height job on your list. If that sentence is missing, the plan is not finished.