---
title: "Unremarkable things we made in 2026"
slug: unremarkable-things-we-made-in-2026
url: https://listedarticles.com/articles/unremarkable-things-we-made-in-2026
canonical_url: https://www.neilchen.co/blog/things2026
content_type: blog_post
language: en
published_at: 2026-11-01T00:00:00.000Z
updated_at: 2026-11-11T08:12:27.071Z
author: "Neil Chen"
authored_by: human
publisher: "Neil Chen"
publisher_url: https://www.neilchen.co/
topics: ["hardware", "design"]
license: all-rights-reserved
word_count: 219
reading_minutes: 1
citation: "Neil Chen, Neil Chen. \"Unremarkable things we made in 2026.\" 1 Nov 2026. https://www.neilchen.co/blog/things2026 (all-rights-reserved)"
---

# Unremarkable things we made in 2026

> Neil Chen's short roundup of maker projects from 2026: an aluminum-extrusion standing desk frame and a laser-cut neon acrylic picture frame, with notes on fitting dovetailed parts onto a small Epilog laser cutter bed.

# Unremarkable things we made in 2026

*2026-11*

## Aluminum extrusion standing desk

This year's splurge was a few hundred linear inches of aluminum extrusion. The frame supports an Ikea tabletop from the dumpster and is bolted on top of a pair of beefy electric standing desk legs:

![desk](https://www.neilchen.co/images/things2026/desk.jpeg)

(tabletop not pictured). This aluminum extrusion frame has proved especially useful for bike maintenance, hanging stuff, and arm-wrestling training.

## Neon picture frame

In addition to good coffee, [Work in Progress cafe in Costa Mesa, CA](https://share.google/aEPfKDhHEKlDHQb9S) sells prints. My best friend Cesar mentioned that he'd bought one of these prints, but didn't have the big ~`25x19`" neon acrylic frame that accompanies it:

![reference frame](https://www.neilchen.co/images/things2026/reference.jpeg)

So I on the flight to NYC I CAD'd it up. I tried to replicate the original feel as closely as possible out of `1/4"` neon green acrylic stock. The backing and mat are made of birch plywood, and the mat/poster snap to the frame with little neodymium magnets.

![CAD](https://www.neilchen.co/images/things2026/cad.png)
![real frame](https://www.neilchen.co/images/things2026/frame.jpeg)

The big challenge here was being limited to a ~`24x12`" nominal workspace on an Epilog laser cutter, while the frame itself is `25x19`". Since the frame dimensions exceed the workspace, I included some dovetails/joinery to assemble the backing and mat. Total part dimensions fit with just enough margin on the Epilog:
![packing in pieces](https://www.neilchen.co/images/things2026/layout.png)
